Cubito sacro
Da Sspera Labs.
Il cubito (dal latino cubitum, gomito) era la misura di lunghezza più comune dell'antichità. Era rappresentata dal avambraccio, a partire dal gomito, fino alla punta del dito medio. Cubito è anche il sinonimo dell'osso dell'avambraccio, l'ulna.
- Cubito ebraico = 44,45 cm
- suddiviso in 6 tefachim
- Cubito egizio = 44,7 cm
- Cubito reale egizio (niswt) = 52,3 cm
- Cubito romano = 44,4375 cm
- Cubito inglese (cubit) = 45,72 cm
- suddiviso in 18 pollici
Del cubito ebraico esistono altre due versioni, una più grande di un palmo (51,8 cm) ed una misurata dal gomito fino alle nocche della mano chiusa (38 cm).
da tradurre, preso da educateyourself.org
Spirali: Quando tagli un pezzo di filo di una specifica lunghezza (Cubito), questo filo risuonerà o funzionerà come un trasformatore di una specifica energia cosmica
Coils When you cut a piece of wire to a specific length known as the "cubit" length, that wire will resonate or act as a transformer to special cosmic energies and draw that energy into the wire. There are many different "cubit' lengths used by advanced civilations down through the ages. In a phone conversation with Slim Spurling in February of 2005, Slim mentioned that he found that the ancient Egyptian Royal cubit (524mm +/- 2mm) to be more useful for bio-physical energies and Hans Becker's "Lost" cubit (596.6714mm or 23.491") more useful for emotional and mental energies. Since I'm adding at least two coils to the larger orgone generators, I've decided to make one coil based on the Royal cubit length and the second coil based on Hans Becker's Lost cubit length. I designate a multible of the original cubit unit by use of the letter "X". For example, a 3X Lost Cubit coil equals 3 x 596.6714mm or 1790.01mm. Any multible length of the cubit unit will produce the desired results. You can also use a 1/2, 1/3, or 1/4 fraction of the cubit length to give you a similar resonant effect, but usually not as stong as the whole cubit unit length. Depending on the gauge of the wire used, I can usually fit a double or triple multible cubit into the TB or HHg. When you coil the wire, you force the orgone energy into a spiral movement. If the coil is laid out in a flat plane, the energy will spread both laterally and vertically. If you stretch the coil into the vertical plane, you have a vertical cone shaped spiral which drives the energy towards the tip of the spiral in a vortex fashion. For the HHg's, I add both a wide cone-shaped spiral coil that encloses the 5 crystals as well as a flat plane coil (sometimes called a 'pancake' coil) placed at the bottom of the HHg. For TB's, I add a single flat coil at the bottom. The two coils shown on the right are wrapped in a configuration known as a SBB coil, or Saint Buster's Button coil , a name coined by Don Croft
